About this publication
ISSN: 2772-8307
Copyright © 2026 Shanghai Jiaotong University. Published by Elsevier B.V. All rights are reserved, including those for text and data mining, AI training, and similar technologies.
cited:58
Effect of edge cracks on critical current degradation in REBCO tapes under tensile stress
-
Article Number:Article 100007
Article preview
Abstract
Corresponding email:tmqu@mail.tsinghua.edu.cn
The slitting process for manufacturing (REBCO, RE = Rare earth) tapes of required width significantly improves the production efficiency and reduces production costs. However, edge cracks induced by the slitting process of wide REBCO tapes may cause premature degradation under high tensile stress in high-field magnets. Therefore, it is necessary to evaluate the effect of edge cracks of REBCO tapes on the critical current () degradation. Firstly, degradation under artificial cracks was measured to validate the applicability of linear elastic fracture mechanics for the REBCO layer. The maximum circumferential stress criterion was used to derive the mixed-mode stress intensity factor of multiple oblique edge cracks. A semi-analytical model considering edge crack properties such as angle , spacing d, and length a, was built to evaluate the critical load and critical crack. We found that when the stress intensity factor at the crack tip is below , edge cracks did not propagate. We examined commercial REBCO tapes manufactured by two different processes, concluding that edge cracks in these tapes will not cause premature degradation.
Review